Brick & Masonry Repair in Chilliwack, BC. Catch it early and it costs a lot less.
Cracked bricks, spalled stone, failing mortar, and structural damage repaired properly — Chilliwack's go-to masonry repair crew.
Masonry Repairs in Chilliwack. What We Do
Brick and masonry repair in Chilliwack, BC. Cracked bricks, spalled faces, failed mortar, rusted lintels, loose stone. We match existing materials so the repair blends in. Masonry gives warning signs. The cheap time to deal with a crack is before water spends a winter behind it.
Repair calls sound like this: "a brick fell off the front of the house," "stair-step cracks in the block," "the arch over the garage is dropping," "white powder all over the chimney." Those are different failures. A fallen brick can be a local mortar issue or a lintel that's rusting and jacking the wall. Stair-step cracks often mean movement. We diagnose before we start cutting.
Matching is half the job. A bright new brick in a 40-year-old wall is a billboard. We hunt salvaged and current stock, blend mortar colour, and tool the joint to the original profile. Perfect matches aren't always possible. We'll show you the blend before we commit a whole elevation.
We don't overscope. If three bricks and two metres of joint are the problem, that's the quote. If the wall is moving, we'll say that too, even if it's a bigger conversation.
What's Included
- Cracked brick replacement
- Spalled brick face repair
- Loose and fallen stone repair
- Mortar joint repair and repointing
- Efflorescence treatment
- Lintel and arch repair
- Foundation masonry repair
- Post-impact and freeze damage repair
When to Call a Masonry Contractor
A brick came off the wall
Don't glue it back. The joint failed for a reason, and there are usually neighbours about to go. We look at the area, not just the hole.
Spalling faces
Freeze-thaw pops the face off. Left alone, water gets deeper every winter. Replace the units and fix why they were wet.
Stair-step cracks
Cracks that step through joints usually mean settlement or a lintel issue. Cosmetic filling without a diagnosis wastes the visit.
Bulging masonry
A section pushing off the backup has lost its ties. That's a structural conversation, not a mortar touch-up.
How Chilliwack weather shows up as masonry damage
Freeze-thaw is the engine. Water in a crack, a night below zero, a bigger crack. Spalling, open joints, and crumbled chimney crowns are the same process on different parts of the house.
Efflorescence (the white chalk) is a messenger. Salts riding water to the surface. Clean it if you want, but find the water. Repointing, flashing, and grading fix more 'staining' than any brick wash.
Rusted steel lintels over windows and garage doors expand as they rust. That expansion cracks the brick above the opening in a very particular pattern. Replacing the brick and leaving the lintel means you'll see us again.
Materials and Methods
Salvage and blend brick
We keep an eye on what's available locally. Sometimes a close blend of two bricks reads better than one wrong 'match.'
Compatible mortar
Harder than the original is a repair that becomes a problem. We mix for the wall's age and brick.
Lintels
Galvanized or stainless replacements, sized for the opening, with end bearing. Then the brick goes back.
What Drives the Cost
Nobody should expect a fake square-foot price from a website. Access, height, matching, and what's behind the masonry move the number more than the brochure photo. Here's what we look at before we quote.
How localized it is
A handful of units is a small job. A whole elevation of spall is not. We'll map it so you're not guessing.
Matching time
Unusual brick adds sourcing. We'll tell you if we can get close before we start cutting holes.
Access
Above a porch roof or on a chimney is different from a garden wall.
Hidden damage
Once we open a section we sometimes find wet sheathing or a failed tie. We stop and talk before we run up the bill.
What Goes Wrong When It's Done Cheap
Caulking cracks in brick
Caulk doesn't belong in a mortar joint. It traps water and looks like a repair from the street in the worst way.
Mismatched mortar smeared as 'good enough'
Grey blobs on brown joints are permanent. Matching takes a sample batch.
Replacing brick and ignoring the lintel
If the steel caused the crack, the steel has to go.
Our Masonry Repairs Process
Condition assessment
We identify the damage and rank it. Some things look worse than they are. Some look like nothing and aren't.
Material sourcing
Matching brick, stone, and mortar before we start cutting, as close as we can get.
Removal
Damaged units come out without wrecking the good masonry around them.
Repair and reset
New material in compatible mortar. Joints tooled to the original profile.
Sealing where it helps
Breathable sealer on repaired, exposed sections when it's warranted.
When a repair is a waste of money
If the wall is moving, the footing is failing, or the veneer has lost its ties, replacing a few faces is theatre. We'll tell you. A small honest decline of the 'easy' job is better than a repair that opens up next winter.
Why Choose Chilliwack Masonry Works?
- Matching brick and mortar for every repair we can
- Honest scopes. We don't invent work
- Structural and cosmetic masonry, diagnosed separately
- Lintel work included when that's the actual problem
Masonry Contractor Serving Chilliwack & the Fraser Valley
We provide masonry repairs services across Chilliwack and the greater Fraser Valley, including Abbotsford, Hope, Agassiz, Mission, Sardis, and surrounding communities. See all service areas →
FAQ
Masonry Repairs in Chilliwack. Common Questions
We do our best. Brick from 40-plus years ago can be hard to match exactly. We source salvaged and new, get as close as possible, and show you the blend before we start.
Ready to start?
Ready for Masonry Repairs in Chilliwack?
Call us or fill out the form. We'll come take a look and give you a clear, written quote.